CPS 3050 Vision


Profold's vision system enhances the capable CPS3050 Basic system with inspection and validation for a competitive edge. With a CPS 3050 Vision System the ProStar Controller will verify printed PIN, the bar code, of other ID printed information against your database for accuracy. The system will also measure the placement of Scratch Off or other labels to ensure that secure information is covered properly and that the label is not skewed. The Profold Vision System can be set to check any number of standard or user-defined verification or placement parameters. If an error is detected, the ProStar Controller will automatically mark the faulty card, then make and reorder a replacement. Replacement cards are placed in a separate bin and the operator can replace the marked cards with the new card or cards that were remade. This system makes it easy for the operator to track faulty cards, and ensures the integrity and security of card data. The ProStar Controller keeps accurate records of all transactions so you can issue reports to send with the job to your customer or for internal accounting.

Applications:

High Volume Feeding
Authentication Labels
Card Personalization
Holograms

Ink Jetting
Scratch Off
Scratch Off Secure (SOS)
Signature Panels
Magnetic Stripes
High Speed Sorting



CPS 3050 Basic


Profold has designed a system that does not require the customer to purchase a new system for each new application. The CPS 3050 Basic System comes standard with Profold's patent pending Horizontal Feeder, a Universal Labeler (unique to the market place), and our labor-saving sorting bins. The feeder can be loaded with up to 3500 CR-80's, then the cards are personalized with an inkjet and labeled at a rate of 30,000/hr. Our Universal Labeler is capable of applying not only scratch-off, but mag-stripes, signature panels, or any number of other label types with webs up to .75"- all with minimal adjustment. Finally, the four-bin sorting unit allows an operator to clear cards from one bin while another is filling without interrupting operation.

Features:
High Speed processing for fast cycle times
Feeding, aligning, labeling, ink jetting, counting, sorting
Fully integrated and upgradeable

PROfold Card Processing System

CPS 3050

CPS 3050 Magnetic


Profold's CPS3050-MAG system provides all the functions of our Basic and Vision-equipped card systems- high-speed feeding, ink jetting, labeling, sorting, and vision verification- and applies, encodes and verifies magnetic strips at very high speed. With Profold's CPS3050 MAG System you can encode either High Coercivity (HiCo) or Low Coercivity (LoCo) - or both on track 1, 2, or 3 - any or all- at the same time! Profold's high-speed encoding solution encodes (and verifies!) to ISO standards at 25,000 cards an hour for Hi-Co tracks and 30,000 cards an hour for LoCo tracks. Encoding failures occur much less than 1% of the time.

If an error is detected, the ProStar Controller will automatically mark the faulty card and -reorder a replacement card

without missing a beat.

Features:
Feeding, aligning, labeling, ink jetting, counting, sorting
Fully integrated and upgradeable
Vision 100% quality assurance checking


Mailing Equipment, Paper & Card Finishing Equipment Manufacturer.

PROfold, Inc.   10300 99th Way, Sebastian, FL.  32958    772-589-0063